N-Substituted Amido Derivatives of Lanthanides

The synthesis of lanthanide amido complexes of the type Ln(CH₃CONR)₃ (I), (OPrⁱ)Ln(C₆H₅CONC₆H₅)₂ (II), and (OBu^t)Ln(C₆H₅CONC₆H₅)₂ (III) [where Ln = La, Pr, Nd; R = C₆H₅, p-NO₂C₆H₄, p-BrC₆H₄] are described. Infrared spectra indicate deprotonation of the secondary amide (anilide). Anion coordination is proposed as chelating bidenate ligands.     

Structural, microstructural and magnetic properties of NiFe2O4, CoFe2O4 and MnFe2O4 nanoferrite thin films

The structural, microstructural and magnetic properties of nanoferrite NiFe₂O₄ (NF), CoFe₂O₄ (CF) and MnFe₂O₄ (MF) thin films have been studied. The coating solution of these ferrite films was prepared by a chemical synthesis route called sol-gel combined metallo-organic decomposition method. The solution was coated on Si substrate by spin coating and annealed at 700 °C for 3 h. X-ray diffraction pattern has been used to analyze the phase structure and lattice parameters. The scanning electron microscopy (SEM) and atomic force microscopy (AFM) have been used to show the nanostructural behavior of these ferrites. The values of average grain's size from SEM are 44, 60 and 74 nm, and from AFM are 46, 61 and 75 nm, respectively, measured for NF, CF and MF ferrites. At room temperature, the values of saturation magnetization, M_s∼50.60, 33.52 and 5.40 emu/cc, and remanent magnetization, M_r∼14.33, 15.50 and 1.10 emu/cc, respectively, are observed for NF, CF and MF. At low temperature measurements of 10 K, the anisotropy of ferromagnetism is observed in these ferrite films. The superparamagnetic/paramagnetic behavior is also confirmed by χ′(T) curves of AC susceptibility by applying DC magnetizing field of 3 Oe. The temperature dependent magnetization measurements show the magnetic phase transition temperature.     

Profiling the structural determinants for the selectivity of representative factor-Xa and thrombin inhibitors using combined ligand-based and structure-based approaches

The current study deciphers the combined ligand- and structure-based computational insights to profile structural determinants for the selectivity of representative diverse classes of FXa-selective and thrombin-selective as well as dual FXa-thrombin high affinity inhibitors. The thrombin-exclusive insertion 60-loop (D-pocket) was observed to be one of the most notable recognition sites for the known thrombin-selective inhibitors. Based on the topological comparison of four common active-site pockets (S1-S4) of FXa and thrombin, the greater structural disparity was observed in the S4-pocket, which was more symmetrical (U-shaped) in FXa as compared to thrombin mainly due to the presence of L99 and I174 residues in latter in place of Y99 and F174 respectively in former protease. The S2 pocket forming partial roof at the entry of 12 ? deep S1-pocket, with two extended β-sheets running antiparallel to each other by undergoing U-turn (～180?), has two conserved glycine residues forming H-bonds with the bound ligand for governing ligand binding affinity. The docking, scoring, and binding pose comparison of the representative high-affinity and selective inhibitors into the active sites of FXa and thrombin revealed critical residues (S214, Y99, W60D) mediating selectivity through direct- and long-range electrostatic interactions. Interestingly, most of the thrombin-selective inhibitors attained S-shaped conformation in thrombin, while FXa-selective inhibitors attained L-shaped conformations in FXa. The role of residue at 99th position of FXa and thrombin toward governing protease selectivity was further substantiated using molecular dynamics simulations on the wild-type and mutated Y99L FXa bound to thrombin-selective inhibitor 2. Furthermore, predictive CoMFA (FXa q2 = 0.814; thrombin q2 = 0.667) and CoMSIA (FXa q2 = 0.807; thrombin q2 = 0.624) models were developed and validated (FXa r2(test) = 0.823; thrombin r(2)(test) = 0.816) to feature molecular determinants of ligand binding affinity using the docking-based conformational alignments (DBCA) of 141 (88(train)+53(test)) and 39 (27(train)+11(test)) nonamidine class of potent FXa (0.004 ≤ K(i) (nM) ≤ 4700) and thrombin (0.001 ≤ K(i) (nM) ≤ 940) inhibitors, respectively. Interestingly, the ligand-based insights well corroborated with the structure-based insights in terms of the role of steric, electrostatic, and hydrophobic parameters for governing the selectivity for the two proteases. The new computational insights presented in this study are expected to be valuable for understanding and designing potent and selective antithrombotic agents.     

“On-water” synthesis of 3-substituted indoles via Knoevenagel/Michael addition sequence catalyzed by Cu doped ZnS NPs

Cu doped ZnS NPs represent a green catalyst for an ‘on-water’ one-pot rapid synthesis of 3-substituted indole derivatives via Knoevenagel/Michael addition reaction of indane-1,3-dione, aromatic aldehydes, and indole. The catalytic activity of Cu doped ZnS NPs was about sevenfold higher as compared to the ZnS NPs. The Cu doped ZnS NPs catalyst could be recovered and reused for five reaction cycles, giving a total TOF = 201 h⁻¹.     

Synthesis and characterization of glycol ether and oxime modified precursors of niobium(V) for soft transformation to niobia

A glycol ether modified precursor, [Nb{O(CH₂CH₂O)₂}(OPrⁱ)₃] (A) was prepared by the reaction of Nb(OPrⁱ)₅ with O(CH₂CH₂OH)₂ in 1:1 molar ratio in anhydrous benzene. Further reactions of A with a variety of internally functionalized oximes in different molar ratios, yielded heteroleptic complexes of the type, [Nb{O(CH₂CH₂O)₂}(OPrⁱ)_3?n{ON = C(CH₃)(Ar)}_n] (1–9) {where Ar = C₄H₃O-2, n = 1 [1], n = 2 [2], n = 3 [3]; C₄H₃S-2, n = 1 [4], n = 2 [5], n = 3 [6]; C₅H₄N-2, n = 1 [7], n = 2 [8], n = 3 [9]}. All the above derivatives have been characterized by elemental analyses, FT-IR, NMR (¹H, ¹³C {¹H}) and FAB mass studies. Spectral studies of 1–9 suggest the presence of mono- and bi-dentate mode of oxime moieties, in the solution and in the solid states, respectively. FAB mass studies indicate monomeric nature for 3 and dimeric nature for A. TG curves of A and 6 show their low thermal stability. Soft transformation of A and 3 to pure niobia, a and b, respectively have been carried out by sol–gel technique. The XRD patterns of niobia a and b suggest the formation of nano-size crystallites of average size of 10.8 and 19.5 nm, respectively. The XRD patterns also indicate the formation of monoclinic phase of the niobia in both the cases. Absorption spectra of a and b suggest energy band gaps of 4.95 and 4.39 eV, respectively.     

Comparison of urinary iodide determination in female thyroid patients by two techniques

Iodine deficiency affects a substantial portion of the world’s population, provoking severe health problems as well as important economic losses to the region in which this condition is found. In present study, evaluated the levels of urinary iodide (UI) and thyroid hormone status in female hypothyroid patients (HPs) and control subjects of same age group 16–30 years. The UI in HPs was measured by means of a Potentiometric method after microwave-assisted acid digestion, and compared the results with those obtained by the Sandell-Kolthoff method. The validity and accuracy was checked by using certified reference materials. The significantly lower concentration of iodide in the urine samples of the female goiter patients were observed as compared to control/referents subjects (p < 0.001). Serum thyroid status thyroid stimulating hormone, free triiodothyronine and free thyroxin were significantly lower in female patients as compared to control females (p < 0.003). The proposed method was relatively rapid, precise, accurate, efficient, as well as cost effective by using inexpensive equipment.     

Integration-mediated prediction enrichment of quantitative model for Hsp90 inhibitors as anti-cancer agents: 3D-QSAR study

The present study describes a systematic 3D-QSAR study consisting of pharmacophore modeling, docking, and integration of ligand-based and structure-based drug design approaches, applied on a dataset of 72 Hsp90 inhibitors as anti-cancer agents. The best pharmacophore model, with one H-bond donor (HBD), one H-bond acceptor (HBA), one hydrophobic_aromatic (Hy_Ar), and two hydrophobic_aliphatic (Hy_Al) features, was developed using the Catalyst/HypoGen algorithm on a training set of 35 compounds. The model was further validated using test set, external set, Fisher’s randomization method, and ability of the pharmacophoric features to complement the active site amino acids. Docking analysis was performed using Hsp90 chaperone (PDB-Id: 1uyf) along with water molecules reported to be crucial for binding and catalysis (Sgobba et al. ChemMedChem 4:1399–1409, 2009). Furthermore, an integration of the ligand-based as well as structure-based drug design approaches was done leading to the integrated model, which was found to be superior over the best pharmacophore model in terms of its predictive ability on internal [integrated model 2: R _(train) = 0.954, R _(test) = 0.888; Hypo-01: R _(train) = 0.912 and R _(test) = 0.819] as well as on external data set [integrated model 2: R _(ext.set) = 0.801; Hypo-01: R _(ext.set) = 0.604].